15:39:04 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:04 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:04 1 (DIST.txt, 24):  = 259003000
15:39:04 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:04 1 (DIST.txt, 26):  = 0
15:39:04 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:04 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:04 1 (DIST.txt, 28):  = 00
15:39:04 1 (DIST.txt, 29): end_while
15:39:04 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:04 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:04 1 (DIST.txt, 28):  = 000
15:39:04 1 (DIST.txt, 29): end_while
15:39:04 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:04 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:04 1 (DIST.txt, 30):  = -71347000
15:39:04 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258241))
15:39:04 1 (DIST.txt, 32):  = 0
15:39:04 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:04 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:04 1 (DIST.txt, 34):  = 00
15:39:04 1 (DIST.txt, 35): end_while
15:39:04 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:04 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:04 1 (DIST.txt, 34):  = 000
15:39:04 1 (DIST.txt, 35): end_while
15:39:04 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:04 1 (DIST.txt, 36): set #x2Int(258241000) trunc ($x2)((258241)) * 1000 + $x2Frac(0x000)
15:39:04 1 (DIST.txt, 36):  = 258241000
15:39:04 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71120))
15:39:04 1 (DIST.txt, 38):  = 0
15:39:04 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:04 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:04 1 (DIST.txt, 40):  = 00
15:39:04 1 (DIST.txt, 41): end_while
15:39:04 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:04 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:04 1 (DIST.txt, 40):  = 000
15:39:04 1 (DIST.txt, 41): end_while
15:39:04 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:04 1 (DIST.txt, 42): set #y2Int(-71120000) trunc ($y2)((-71120)) * 1000 + $y2Frac(0x000)
15:39:04 1 (DIST.txt, 42):  = -71120000
15:39:04 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258241000) #y2Int))(-71120000)))
15:39:04 1 (DIST.txt, 45):  = 795093
15:39:04 1 (DIST.txt, 46): log #distance(795093)
15:39:04 1 (DIST.txt, 46): 795093
15:39:04 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258241) $y2(-71120)
15:39:04 1 (DIST.txt, 47): 259003 -71347 258241 -71120
15:39:04 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258241000) #y2Int(-71120000)
15:39:04 1 (DIST.txt, 48): 259003000 -71347000 258241000 -71120000
15:39:04 1 (DIST.txt, 49): goto start
15:39:04 1 (DIST.txt, 4): set linedelay 5
15:39:04 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:04 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:04 1 (DIST.txt, 8): readmem $x2(258241) 0x16A2ABF8 F
15:39:04 1 (DIST.txt, 9): readmem $y2(-71120) 0x16A2ABF4 F
15:39:04 1 (DIST.txt, 11): set $zero(0) 0
15:39:04 1 (DIST.txt, 11):  = 0
15:39:04 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:04 1 (DIST.txt, 12):  = 259003
15:39:04 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:04 1 (DIST.txt, 13):  = -71347
15:39:04 1 (DIST.txt, 14): set $x2(258364) $x2(258364)
15:39:04 1 (DIST.txt, 14):  = 258364
15:39:04 1 (DIST.txt, 15): set $y2(-71168) $y2(-71168)
15:39:04 1 (DIST.txt, 15):  = -71168
15:39:04 1 (DIST.txt, 18): set #distance(795093) point_distance (x1 y1 x2 y2)
15:39:04 1 (DIST.txt, 18):  = -1
15:39:04 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:04 1 (DIST.txt, 20):  = 0
15:39:04 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:04 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:04 1 (DIST.txt, 22):  = 00
15:39:04 1 (DIST.txt, 23): end_while
15:39:04 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:04 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:04 1 (DIST.txt, 22):  = 000
15:39:04 1 (DIST.txt, 23): end_while
15:39:04 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:04 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:04 1 (DIST.txt, 24):  = 259003000
15:39:04 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:04 1 (DIST.txt, 26):  = 0
15:39:04 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:04 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:04 1 (DIST.txt, 28):  = 00
15:39:04 1 (DIST.txt, 29): end_while
15:39:04 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:04 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:04 1 (DIST.txt, 28):  = 000
15:39:04 1 (DIST.txt, 29): end_while
15:39:04 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:05 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:05 1 (DIST.txt, 30):  = -71347000
15:39:05 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258364))
15:39:05 1 (DIST.txt, 32):  = 0
15:39:05 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:05 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:05 1 (DIST.txt, 34):  = 00
15:39:05 1 (DIST.txt, 35): end_while
15:39:05 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:05 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:05 1 (DIST.txt, 34):  = 000
15:39:05 1 (DIST.txt, 35): end_while
15:39:05 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:05 1 (DIST.txt, 36): set #x2Int(258241000) trunc ($x2)((258364)) * 1000 + $x2Frac(0x000)
15:39:05 1 (DIST.txt, 36):  = 258364000
15:39:05 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71168))
15:39:05 1 (DIST.txt, 38):  = 0
15:39:05 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:05 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:05 1 (DIST.txt, 40):  = 00
15:39:05 1 (DIST.txt, 41): end_while
15:39:05 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:05 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:05 1 (DIST.txt, 40):  = 000
15:39:05 1 (DIST.txt, 41): end_while
15:39:05 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:05 1 (DIST.txt, 42): set #y2Int(-71120000) trunc ($y2)((-71168)) * 1000 + $y2Frac(0x000)
15:39:05 1 (DIST.txt, 42):  = -71168000
15:39:05 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258364000) #y2Int))(-71168000)))
15:39:05 1 (DIST.txt, 45):  = 663598
15:39:05 1 (DIST.txt, 46): log #distance(663598)
15:39:05 1 (DIST.txt, 46): 663598
15:39:05 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258364) $y2(-71168)
15:39:05 1 (DIST.txt, 47): 259003 -71347 258364 -71168
15:39:05 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258364000) #y2Int(-71168000)
15:39:05 1 (DIST.txt, 48): 259003000 -71347000 258364000 -71168000
15:39:05 1 (DIST.txt, 49): goto start
15:39:05 1 (DIST.txt, 4): set linedelay 5
15:39:05 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:05 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:05 1 (DIST.txt, 8): readmem $x2(258364) 0x16A2ABF8 F
15:39:05 1 (DIST.txt, 9): readmem $y2(-71168) 0x16A2ABF4 F
15:39:05 1 (DIST.txt, 11): set $zero(0) 0
15:39:05 1 (DIST.txt, 11):  = 0
15:39:05 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:05 1 (DIST.txt, 12):  = 259003
15:39:05 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:05 1 (DIST.txt, 13):  = -71347
15:39:05 1 (DIST.txt, 14): set $x2(258440) $x2(258440)
15:39:05 1 (DIST.txt, 14):  = 258440
15:39:05 1 (DIST.txt, 15): set $y2(-71192) $y2(-71192)
15:39:05 1 (DIST.txt, 15):  = -71192
15:39:05 1 (DIST.txt, 18): set #distance(663598) point_distance (x1 y1 x2 y2)
15:39:05 1 (DIST.txt, 18):  = -1
15:39:05 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:05 1 (DIST.txt, 20):  = 0
15:39:05 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:05 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:05 1 (DIST.txt, 22):  = 00
15:39:05 1 (DIST.txt, 23): end_while
15:39:05 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:05 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:05 1 (DIST.txt, 22):  = 000
15:39:05 1 (DIST.txt, 23): end_while
15:39:05 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:05 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:05 1 (DIST.txt, 24):  = 259003000
15:39:05 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:05 1 (DIST.txt, 26):  = 0
15:39:05 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:05 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:05 1 (DIST.txt, 28):  = 00
15:39:05 1 (DIST.txt, 29): end_while
15:39:05 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:05 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:05 1 (DIST.txt, 28):  = 000
15:39:05 1 (DIST.txt, 29): end_while
15:39:05 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:05 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:05 1 (DIST.txt, 30):  = -71347000
15:39:05 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258440))
15:39:05 1 (DIST.txt, 32):  = 0
15:39:05 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:05 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:05 1 (DIST.txt, 34):  = 00
15:39:05 1 (DIST.txt, 35): end_while
15:39:05 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:05 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:05 1 (DIST.txt, 34):  = 000
15:39:05 1 (DIST.txt, 35): end_while
15:39:05 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:05 1 (DIST.txt, 36): set #x2Int(258364000) trunc ($x2)((258440)) * 1000 + $x2Frac(0x000)
15:39:05 1 (DIST.txt, 36):  = 258440000
15:39:05 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71192))
15:39:05 1 (DIST.txt, 38):  = 0
15:39:05 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:06 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:06 1 (DIST.txt, 40):  = 00
15:39:06 1 (DIST.txt, 41): end_while
15:39:06 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:06 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:06 1 (DIST.txt, 40):  = 000
15:39:06 1 (DIST.txt, 41): end_while
15:39:06 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:06 1 (DIST.txt, 42): set #y2Int(-71168000) trunc ($y2)((-71192)) * 1000 + $y2Frac(0x000)
15:39:06 1 (DIST.txt, 42):  = -71192000
15:39:06 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258440000) #y2Int))(-71192000)))
15:39:06 1 (DIST.txt, 45):  = 583947
15:39:06 1 (DIST.txt, 46): log #distance(583947)
15:39:06 1 (DIST.txt, 46): 583947
15:39:06 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258440) $y2(-71192)
15:39:06 1 (DIST.txt, 47): 259003 -71347 258440 -71192
15:39:06 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258440000) #y2Int(-71192000)
15:39:06 1 (DIST.txt, 48): 259003000 -71347000 258440000 -71192000
15:39:06 1 (DIST.txt, 49): goto start
15:39:06 1 (DIST.txt, 4): set linedelay 5
15:39:06 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:06 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:06 1 (DIST.txt, 8): readmem $x2(258440) 0x16A2ABF8 F
15:39:06 1 (DIST.txt, 9): readmem $y2(-71192) 0x16A2ABF4 F
15:39:06 1 (DIST.txt, 11): set $zero(0) 0
15:39:06 1 (DIST.txt, 11):  = 0
15:39:06 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:06 1 (DIST.txt, 12):  = 259003
15:39:06 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:06 1 (DIST.txt, 13):  = -71347
15:39:06 1 (DIST.txt, 14): set $x2(258585) $x2(258585)
15:39:06 1 (DIST.txt, 14):  = 258585
15:39:06 1 (DIST.txt, 15): set $y2(-71237) $y2(-71237)
15:39:06 1 (DIST.txt, 15):  = -71237
15:39:06 1 (DIST.txt, 18): set #distance(583947) point_distance (x1 y1 x2 y2)
15:39:06 1 (DIST.txt, 18):  = -1
15:39:06 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:06 1 (DIST.txt, 20):  = 0
15:39:06 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:06 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:06 1 (DIST.txt, 22):  = 00
15:39:06 1 (DIST.txt, 23): end_while
15:39:06 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:06 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:06 1 (DIST.txt, 22):  = 000
15:39:06 1 (DIST.txt, 23): end_while
15:39:06 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:06 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:06 1 (DIST.txt, 24):  = 259003000
15:39:06 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:06 1 (DIST.txt, 26):  = 0
15:39:06 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:06 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:06 1 (DIST.txt, 28):  = 00
15:39:06 1 (DIST.txt, 29): end_while
15:39:06 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:06 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:06 1 (DIST.txt, 28):  = 000
15:39:06 1 (DIST.txt, 29): end_while
15:39:06 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:06 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:06 1 (DIST.txt, 30):  = -71347000
15:39:06 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258585))
15:39:06 1 (DIST.txt, 32):  = 0
15:39:06 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:06 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:06 1 (DIST.txt, 34):  = 00
15:39:06 1 (DIST.txt, 35): end_while
15:39:06 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:06 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:06 1 (DIST.txt, 34):  = 000
15:39:06 1 (DIST.txt, 35): end_while
15:39:06 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:06 1 (DIST.txt, 36): set #x2Int(258440000) trunc ($x2)((258585)) * 1000 + $x2Frac(0x000)
15:39:06 1 (DIST.txt, 36):  = 258585000
15:39:06 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71237))
15:39:06 1 (DIST.txt, 38):  = 0
15:39:06 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:06 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:06 1 (DIST.txt, 40):  = 00
15:39:06 1 (DIST.txt, 41): end_while
15:39:06 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:06 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:06 1 (DIST.txt, 40):  = 000
15:39:06 1 (DIST.txt, 41): end_while
15:39:06 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:06 1 (DIST.txt, 42): set #y2Int(-71192000) trunc ($y2)((-71237)) * 1000 + $y2Frac(0x000)
15:39:06 1 (DIST.txt, 42):  = -71237000
15:39:06 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258585000) #y2Int))(-71237000)))
15:39:06 1 (DIST.txt, 45):  = 432231
15:39:06 1 (DIST.txt, 46): log #distance(432231)
15:39:06 1 (DIST.txt, 46): 432231
15:39:06 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258585) $y2(-71237)
15:39:06 1 (DIST.txt, 47): 259003 -71347 258585 -71237
15:39:06 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258585000) #y2Int(-71237000)
15:39:06 1 (DIST.txt, 48): 259003000 -71347000 258585000 -71237000
15:39:06 1 (DIST.txt, 49): goto start
15:39:07 1 (DIST.txt, 4): set linedelay 5
15:39:07 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:07 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:07 1 (DIST.txt, 8): readmem $x2(258585) 0x16A2ABF8 F
15:39:07 1 (DIST.txt, 9): readmem $y2(-71237) 0x16A2ABF4 F
15:39:07 1 (DIST.txt, 11): set $zero(0) 0
15:39:07 1 (DIST.txt, 11):  = 0
15:39:07 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:07 1 (DIST.txt, 12):  = 259003
15:39:07 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:07 1 (DIST.txt, 13):  = -71347
15:39:07 1 (DIST.txt, 14): set $x2(258656) $x2(258656)
15:39:07 1 (DIST.txt, 14):  = 258656
15:39:07 1 (DIST.txt, 15): set $y2(-71282) $y2(-71282)
15:39:07 1 (DIST.txt, 15):  = -71282
15:39:07 1 (DIST.txt, 18): set #distance(432231) point_distance (x1 y1 x2 y2)
15:39:07 1 (DIST.txt, 18):  = -1
15:39:07 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:07 1 (DIST.txt, 20):  = 0
15:39:07 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:07 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:07 1 (DIST.txt, 22):  = 00
15:39:07 1 (DIST.txt, 23): end_while
15:39:07 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:07 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:07 1 (DIST.txt, 22):  = 000
15:39:07 1 (DIST.txt, 23): end_while
15:39:07 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:07 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:07 1 (DIST.txt, 24):  = 259003000
15:39:07 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:07 1 (DIST.txt, 26):  = 0
15:39:07 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:07 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:07 1 (DIST.txt, 28):  = 00
15:39:07 1 (DIST.txt, 29): end_while
15:39:07 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:07 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:07 1 (DIST.txt, 28):  = 000
15:39:07 1 (DIST.txt, 29): end_while
15:39:07 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:07 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:07 1 (DIST.txt, 30):  = -71347000
15:39:07 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258656))
15:39:07 1 (DIST.txt, 32):  = 0
15:39:07 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:07 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:07 1 (DIST.txt, 34):  = 00
15:39:07 1 (DIST.txt, 35): end_while
15:39:07 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:07 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:07 1 (DIST.txt, 34):  = 000
15:39:07 1 (DIST.txt, 35): end_while
15:39:07 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:07 1 (DIST.txt, 36): set #x2Int(258585000) trunc ($x2)((258656)) * 1000 + $x2Frac(0x000)
15:39:07 1 (DIST.txt, 36):  = 258656000
15:39:07 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71282))
15:39:07 1 (DIST.txt, 38):  = 0
15:39:07 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:07 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:07 1 (DIST.txt, 40):  = 00
15:39:07 1 (DIST.txt, 41): end_while
15:39:07 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:07 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:07 1 (DIST.txt, 40):  = 000
15:39:07 1 (DIST.txt, 41): end_while
15:39:07 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:07 1 (DIST.txt, 42): set #y2Int(-71237000) trunc ($y2)((-71282)) * 1000 + $y2Frac(0x000)
15:39:07 1 (DIST.txt, 42):  = -71282000
15:39:07 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258656000) #y2Int))(-71282000)))
15:39:07 1 (DIST.txt, 45):  = 353035
15:39:07 1 (DIST.txt, 46): log #distance(353035)
15:39:07 1 (DIST.txt, 46): 353035
15:39:07 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258656) $y2(-71282)
15:39:07 1 (DIST.txt, 47): 259003 -71347 258656 -71282
15:39:07 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258656000) #y2Int(-71282000)
15:39:07 1 (DIST.txt, 48): 259003000 -71347000 258656000 -71282000
15:39:07 1 (DIST.txt, 49): goto start
15:39:07 1 (DIST.txt, 4): set linedelay 5
15:39:07 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:07 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:07 1 (DIST.txt, 8): readmem $x2(258656) 0x16A2ABF8 F
15:39:07 1 (DIST.txt, 9): readmem $y2(-71282) 0x16A2ABF4 F
15:39:07 1 (DIST.txt, 11): set $zero(0) 0
15:39:07 1 (DIST.txt, 11):  = 0
15:39:07 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:07 1 (DIST.txt, 12):  = 259003
15:39:07 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:07 1 (DIST.txt, 13):  = -71347
15:39:07 1 (DIST.txt, 14): set $x2(258810) $x2(258810)
15:39:07 1 (DIST.txt, 14):  = 258810
15:39:07 1 (DIST.txt, 15): set $y2(-71305) $y2(-71305)
15:39:07 1 (DIST.txt, 15):  = -71305
15:39:07 1 (DIST.txt, 18): set #distance(353035) point_distance (x1 y1 x2 y2)
15:39:07 1 (DIST.txt, 18):  = -1
15:39:07 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:08 1 (DIST.txt, 20):  = 0
15:39:08 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:08 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:08 1 (DIST.txt, 22):  = 00
15:39:08 1 (DIST.txt, 23): end_while
15:39:08 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:08 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:08 1 (DIST.txt, 22):  = 000
15:39:08 1 (DIST.txt, 23): end_while
15:39:08 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:08 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:08 1 (DIST.txt, 24):  = 259003000
15:39:08 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:08 1 (DIST.txt, 26):  = 0
15:39:08 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:08 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:08 1 (DIST.txt, 28):  = 00
15:39:08 1 (DIST.txt, 29): end_while
15:39:08 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:08 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:08 1 (DIST.txt, 28):  = 000
15:39:08 1 (DIST.txt, 29): end_while
15:39:08 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:08 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:08 1 (DIST.txt, 30):  = -71347000
15:39:08 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258810))
15:39:08 1 (DIST.txt, 32):  = 0
15:39:08 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:08 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:08 1 (DIST.txt, 34):  = 00
15:39:08 1 (DIST.txt, 35): end_while
15:39:08 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:08 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:08 1 (DIST.txt, 34):  = 000
15:39:08 1 (DIST.txt, 35): end_while
15:39:08 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:08 1 (DIST.txt, 36): set #x2Int(258656000) trunc ($x2)((258810)) * 1000 + $x2Frac(0x000)
15:39:08 1 (DIST.txt, 36):  = 258810000
15:39:08 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71305))
15:39:08 1 (DIST.txt, 38):  = 0
15:39:08 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:08 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:08 1 (DIST.txt, 40):  = 00
15:39:08 1 (DIST.txt, 41): end_while
15:39:08 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:08 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:08 1 (DIST.txt, 40):  = 000
15:39:08 1 (DIST.txt, 41): end_while
15:39:08 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:08 1 (DIST.txt, 42): set #y2Int(-71282000) trunc ($y2)((-71305)) * 1000 + $y2Frac(0x000)
15:39:08 1 (DIST.txt, 42):  = -71305000
15:39:08 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258810000) #y2Int))(-71305000)))
15:39:08 1 (DIST.txt, 45):  = 197517
15:39:08 1 (DIST.txt, 46): log #distance(197517)
15:39:08 1 (DIST.txt, 46): 197517
15:39:08 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258810) $y2(-71305)
15:39:08 1 (DIST.txt, 47): 259003 -71347 258810 -71305
15:39:08 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258810000) #y2Int(-71305000)
15:39:08 1 (DIST.txt, 48): 259003000 -71347000 258810000 -71305000
15:39:08 1 (DIST.txt, 49): goto start
15:39:08 1 (DIST.txt, 4): set linedelay 5
15:39:08 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:08 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:08 1 (DIST.txt, 8): readmem $x2(258810) 0x16A2ABF8 F
15:39:08 1 (DIST.txt, 9): readmem $y2(-71305) 0x16A2ABF4 F
15:39:08 1 (DIST.txt, 11): set $zero(0) 0
15:39:08 1 (DIST.txt, 11):  = 0
15:39:08 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:08 1 (DIST.txt, 12):  = 259003
15:39:08 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:08 1 (DIST.txt, 13):  = -71347
15:39:08 1 (DIST.txt, 14): set $x2(258893) $x2(258893)
15:39:08 1 (DIST.txt, 14):  = 258893
15:39:08 1 (DIST.txt, 15): set $y2(-71320) $y2(-71320)
15:39:08 1 (DIST.txt, 15):  = -71320
15:39:08 1 (DIST.txt, 18): set #distance(197517) point_distance (x1 y1 x2 y2)
15:39:08 1 (DIST.txt, 18):  = -1
15:39:08 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:08 1 (DIST.txt, 20):  = 0
15:39:08 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:08 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:08 1 (DIST.txt, 22):  = 00
15:39:08 1 (DIST.txt, 23): end_while
15:39:08 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:08 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:08 1 (DIST.txt, 22):  = 000
15:39:08 1 (DIST.txt, 23): end_while
15:39:08 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:08 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:08 1 (DIST.txt, 24):  = 259003000
15:39:08 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:08 1 (DIST.txt, 26):  = 0
15:39:08 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:08 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:08 1 (DIST.txt, 28):  = 00
15:39:08 1 (DIST.txt, 29): end_while
15:39:09 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:09 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:09 1 (DIST.txt, 28):  = 000
15:39:09 1 (DIST.txt, 29): end_while
15:39:09 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:09 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:09 1 (DIST.txt, 30):  = -71347000
15:39:09 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258893))
15:39:09 1 (DIST.txt, 32):  = 0
15:39:09 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:09 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:09 1 (DIST.txt, 34):  = 00
15:39:09 1 (DIST.txt, 35): end_while
15:39:09 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:09 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:09 1 (DIST.txt, 34):  = 000
15:39:09 1 (DIST.txt, 35): end_while
15:39:09 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:09 1 (DIST.txt, 36): set #x2Int(258810000) trunc ($x2)((258893)) * 1000 + $x2Frac(0x000)
15:39:09 1 (DIST.txt, 36):  = 258893000
15:39:09 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71320))
15:39:09 1 (DIST.txt, 38):  = 0
15:39:09 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:09 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:09 1 (DIST.txt, 40):  = 00
15:39:09 1 (DIST.txt, 41): end_while
15:39:09 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:09 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:09 1 (DIST.txt, 40):  = 000
15:39:09 1 (DIST.txt, 41): end_while
15:39:09 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:09 1 (DIST.txt, 42): set #y2Int(-71305000) trunc ($y2)((-71320)) * 1000 + $y2Frac(0x000)
15:39:09 1 (DIST.txt, 42):  = -71320000
15:39:09 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258893000) #y2Int))(-71320000)))
15:39:09 1 (DIST.txt, 45):  = 113265
15:39:09 1 (DIST.txt, 46): log #distance(113265)
15:39:09 1 (DIST.txt, 46): 113265
15:39:09 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258893) $y2(-71320)
15:39:09 1 (DIST.txt, 47): 259003 -71347 258893 -71320
15:39:09 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258893000) #y2Int(-71320000)
15:39:09 1 (DIST.txt, 48): 259003000 -71347000 258893000 -71320000
15:39:09 1 (DIST.txt, 49): goto start
15:39:09 1 (DIST.txt, 4): set linedelay 5
15:39:09 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:09 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:09 1 (DIST.txt, 8): readmem $x2(258893) 0x16A2ABF8 F
15:39:09 1 (DIST.txt, 9): readmem $y2(-71320) 0x16A2ABF4 F
15:39:09 1 (DIST.txt, 11): set $zero(0) 0
15:39:09 1 (DIST.txt, 11):  = 0
15:39:09 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:09 1 (DIST.txt, 12):  = 259003
15:39:09 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:09 1 (DIST.txt, 13):  = -71347
15:39:09 1 (DIST.txt, 14): set $x2(258945) $x2(258945)
15:39:09 1 (DIST.txt, 14):  = 258945
15:39:09 1 (DIST.txt, 15): set $y2(-71335) $y2(-71335)
15:39:09 1 (DIST.txt, 15):  = -71335
15:39:09 1 (DIST.txt, 18): set #distance(113265) point_distance (x1 y1 x2 y2)
15:39:09 1 (DIST.txt, 18):  = -1
15:39:09 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:09 1 (DIST.txt, 20):  = 0
15:39:09 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:09 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:09 1 (DIST.txt, 22):  = 00
15:39:09 1 (DIST.txt, 23): end_while
15:39:09 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:09 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:09 1 (DIST.txt, 22):  = 000
15:39:09 1 (DIST.txt, 23): end_while
15:39:09 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:09 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:09 1 (DIST.txt, 24):  = 259003000
15:39:09 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:09 1 (DIST.txt, 26):  = 0
15:39:09 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:09 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:09 1 (DIST.txt, 28):  = 00
15:39:09 1 (DIST.txt, 29): end_while
15:39:09 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:09 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:09 1 (DIST.txt, 28):  = 000
15:39:09 1 (DIST.txt, 29): end_while
15:39:09 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:09 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:09 1 (DIST.txt, 30):  = -71347000
15:39:09 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258945))
15:39:09 1 (DIST.txt, 32):  = 0
15:39:09 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:09 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:09 1 (DIST.txt, 34):  = 00
15:39:09 1 (DIST.txt, 35): end_while
15:39:09 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:09 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:09 1 (DIST.txt, 34):  = 000
15:39:09 1 (DIST.txt, 35): end_while
15:39:10 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:10 1 (DIST.txt, 36): set #x2Int(258893000) trunc ($x2)((258945)) * 1000 + $x2Frac(0x000)
15:39:10 1 (DIST.txt, 36):  = 258945000
15:39:10 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71335))
15:39:10 1 (DIST.txt, 38):  = 0
15:39:10 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:10 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:10 1 (DIST.txt, 40):  = 00
15:39:10 1 (DIST.txt, 41): end_while
15:39:10 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:10 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:10 1 (DIST.txt, 40):  = 000
15:39:10 1 (DIST.txt, 41): end_while
15:39:10 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:10 1 (DIST.txt, 42): set #y2Int(-71320000) trunc ($y2)((-71335)) * 1000 + $y2Frac(0x000)
15:39:10 1 (DIST.txt, 42):  = -71335000
15:39:10 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258945000) #y2Int))(-71335000)))
15:39:10 1 (DIST.txt, 45):  = 59228
15:39:10 1 (DIST.txt, 46): log #distance(59228)
15:39:10 1 (DIST.txt, 46): 59228
15:39:10 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258945) $y2(-71335)
15:39:10 1 (DIST.txt, 47): 259003 -71347 258945 -71335
15:39:10 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258945000) #y2Int(-71335000)
15:39:10 1 (DIST.txt, 48): 259003000 -71347000 258945000 -71335000
15:39:10 1 (DIST.txt, 49): goto start
15:39:10 1 (DIST.txt, 4): set linedelay 5
15:39:10 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:10 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:10 1 (DIST.txt, 8): readmem $x2(258945) 0x16A2ABF8 F
15:39:10 1 (DIST.txt, 9): readmem $y2(-71335) 0x16A2ABF4 F
15:39:10 1 (DIST.txt, 11): set $zero(0) 0
15:39:10 1 (DIST.txt, 11):  = 0
15:39:10 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:10 1 (DIST.txt, 12):  = 259003
15:39:10 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:10 1 (DIST.txt, 13):  = -71347
15:39:10 1 (DIST.txt, 14): set $x2(258945) $x2(258945)
15:39:10 1 (DIST.txt, 14):  = 258945
15:39:10 1 (DIST.txt, 15): set $y2(-71335) $y2(-71335)
15:39:10 1 (DIST.txt, 15):  = -71335
15:39:10 1 (DIST.txt, 18): set #distance(59228) point_distance (x1 y1 x2 y2)
15:39:10 1 (DIST.txt, 18):  = -1
15:39:10 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:10 1 (DIST.txt, 20):  = 0
15:39:10 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:10 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:10 1 (DIST.txt, 22):  = 00
15:39:10 1 (DIST.txt, 23): end_while
15:39:10 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:10 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:10 1 (DIST.txt, 22):  = 000
15:39:10 1 (DIST.txt, 23): end_while
15:39:10 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:10 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:10 1 (DIST.txt, 24):  = 259003000
15:39:10 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:10 1 (DIST.txt, 26):  = 0
15:39:10 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:10 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:10 1 (DIST.txt, 28):  = 00
15:39:10 1 (DIST.txt, 29): end_while
15:39:10 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:10 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:10 1 (DIST.txt, 28):  = 000
15:39:10 1 (DIST.txt, 29): end_while
15:39:10 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:10 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:10 1 (DIST.txt, 30):  = -71347000
15:39:10 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258945))
15:39:10 1 (DIST.txt, 32):  = 0
15:39:10 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:10 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:10 1 (DIST.txt, 34):  = 00
15:39:10 1 (DIST.txt, 35): end_while
15:39:10 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:10 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:10 1 (DIST.txt, 34):  = 000
15:39:10 1 (DIST.txt, 35): end_while
15:39:10 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:10 1 (DIST.txt, 36): set #x2Int(258945000) trunc ($x2)((258945)) * 1000 + $x2Frac(0x000)
15:39:10 1 (DIST.txt, 36):  = 258945000
15:39:10 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71335))
15:39:10 1 (DIST.txt, 38):  = 0
15:39:10 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:10 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:10 1 (DIST.txt, 40):  = 00
15:39:10 1 (DIST.txt, 41): end_while
15:39:10 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:10 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:10 1 (DIST.txt, 40):  = 000
15:39:10 1 (DIST.txt, 41): end_while
15:39:10 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:10 1 (DIST.txt, 42): set #y2Int(-71335000) trunc ($y2)((-71335)) * 1000 + $y2Frac(0x000)
15:39:10 1 (DIST.txt, 42):  = -71335000
15:39:10 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258945000) #y2Int))(-71335000)))
15:39:11 1 (DIST.txt, 45):  = 59228
15:39:11 1 (DIST.txt, 46): log #distance(59228)
15:39:11 1 (DIST.txt, 46): 59228
15:39:11 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258945) $y2(-71335)
15:39:11 1 (DIST.txt, 47): 259003 -71347 258945 -71335
15:39:11 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258945000) #y2Int(-71335000)
15:39:11 1 (DIST.txt, 48): 259003000 -71347000 258945000 -71335000
15:39:11 1 (DIST.txt, 49): goto start
15:39:11 1 (DIST.txt, 4): set linedelay 5
15:39:11 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:11 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:11 1 (DIST.txt, 8): readmem $x2(258945) 0x16A2ABF8 F
15:39:11 1 (DIST.txt, 9): readmem $y2(-71335) 0x16A2ABF4 F
15:39:11 1 (DIST.txt, 11): set $zero(0) 0
15:39:11 1 (DIST.txt, 11):  = 0
15:39:11 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:11 1 (DIST.txt, 12):  = 259003
15:39:11 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:11 1 (DIST.txt, 13):  = -71347
15:39:11 1 (DIST.txt, 14): set $x2(258945) $x2(258945)
15:39:11 1 (DIST.txt, 14):  = 258945
15:39:11 1 (DIST.txt, 15): set $y2(-71335) $y2(-71335)
15:39:11 1 (DIST.txt, 15):  = -71335
15:39:11 1 (DIST.txt, 18): set #distance(59228) point_distance (x1 y1 x2 y2)
15:39:11 1 (DIST.txt, 18):  = -1
15:39:11 1 (DIST.txt, 20): set $x1Frac(0x000) frac ($x1)((259003))
15:39:11 1 (DIST.txt, 20):  = 0
15:39:11 1 (DIST.txt, 21): while size ($x1Frac)((0)) < 3
15:39:11 1 (DIST.txt, 22):     set $x1Frac(0) $x1Frac$zero(0x00)
15:39:11 1 (DIST.txt, 22):  = 00
15:39:11 1 (DIST.txt, 23): end_while
15:39:11 1 (DIST.txt, 21): while size ($x1Frac)((00)) < 3
15:39:11 1 (DIST.txt, 22):     set $x1Frac(0x00) $x1Frac$zero(0x000)
15:39:11 1 (DIST.txt, 22):  = 000
15:39:11 1 (DIST.txt, 23): end_while
15:39:11 1 (DIST.txt, 21): while size ($x1Frac)((000)) < 3
15:39:11 1 (DIST.txt, 24): set #x1Int(259003000) trunc ($x1)((259003)) * 1000 + $x1Frac(0x000)
15:39:11 1 (DIST.txt, 24):  = 259003000
15:39:11 1 (DIST.txt, 26): set $y1Frac(0x000) frac ($y1)((-71347))
15:39:11 1 (DIST.txt, 26):  = 0
15:39:11 1 (DIST.txt, 27): while size ($y1Frac)((0)) < 3
15:39:11 1 (DIST.txt, 28):     set $y1Frac(0) $y1Frac$zero(0x00)
15:39:11 1 (DIST.txt, 28):  = 00
15:39:11 1 (DIST.txt, 29): end_while
15:39:11 1 (DIST.txt, 27): while size ($y1Frac)((00)) < 3
15:39:11 1 (DIST.txt, 28):     set $y1Frac(0x00) $y1Frac$zero(0x000)
15:39:11 1 (DIST.txt, 28):  = 000
15:39:11 1 (DIST.txt, 29): end_while
15:39:11 1 (DIST.txt, 27): while size ($y1Frac)((000)) < 3
15:39:11 1 (DIST.txt, 30): set #y1Int(-71347000) trunc ($y1)((-71347)) * 1000 + $y1Frac(0x000)
15:39:11 1 (DIST.txt, 30):  = -71347000
15:39:11 1 (DIST.txt, 32): set $x2Frac(0x000) frac ($x2)((258945))
15:39:11 1 (DIST.txt, 32):  = 0
15:39:11 1 (DIST.txt, 33): while size ($x2Frac)((0)) < 3
15:39:11 1 (DIST.txt, 34):     set $x2Frac(0) $x2Frac$zero(0x00)
15:39:11 1 (DIST.txt, 34):  = 00
15:39:11 1 (DIST.txt, 35): end_while
15:39:11 1 (DIST.txt, 33): while size ($x2Frac)((00)) < 3
15:39:11 1 (DIST.txt, 34):     set $x2Frac(0x00) $x2Frac$zero(0x000)
15:39:11 1 (DIST.txt, 34):  = 000
15:39:11 1 (DIST.txt, 35): end_while
15:39:11 1 (DIST.txt, 33): while size ($x2Frac)((000)) < 3
15:39:11 1 (DIST.txt, 36): set #x2Int(258945000) trunc ($x2)((258945)) * 1000 + $x2Frac(0x000)
15:39:11 1 (DIST.txt, 36):  = 258945000
15:39:11 1 (DIST.txt, 38): set $y2Frac(0x000) frac ($y2)((-71335))
15:39:11 1 (DIST.txt, 38):  = 0
15:39:11 1 (DIST.txt, 39): while size ($y2Frac)((0)) < 3
15:39:11 1 (DIST.txt, 40):     set $y2Frac(0) $y2Frac$zero(0x00)
15:39:11 1 (DIST.txt, 40):  = 00
15:39:11 1 (DIST.txt, 41): end_while
15:39:11 1 (DIST.txt, 39): while size ($y2Frac)((00)) < 3
15:39:11 1 (DIST.txt, 40):     set $y2Frac(0x00) $y2Frac$zero(0x000)
15:39:11 1 (DIST.txt, 40):  = 000
15:39:11 1 (DIST.txt, 41): end_while
15:39:11 1 (DIST.txt, 39): while size ($y2Frac)((000)) < 3
15:39:11 1 (DIST.txt, 42): set #y2Int(-71335000) trunc ($y2)((-71335)) * 1000 + $y2Frac(0x000)
15:39:11 1 (DIST.txt, 42):  = -71335000
15:39:11 1 (DIST.txt, 45): set #distance(-1) round (point_distance (#x1Int((259003000) #y1Int(-71347000) #x2Int(258945000) #y2Int))(-71335000)))
15:39:11 1 (DIST.txt, 45):  = 59228
15:39:11 1 (DIST.txt, 46): log #distance(59228)
15:39:11 1 (DIST.txt, 46): 59228
15:39:11 1 (DIST.txt, 47): log $x1(259003) $y1(-71347) $x2(258945) $y2(-71335)
15:39:11 1 (DIST.txt, 47): 259003 -71347 258945 -71335
15:39:11 1 (DIST.txt, 48): log #x1Int(259003000) #y1Int(-71347000) #x2Int(258945000) #y2Int(-71335000)
15:39:11 1 (DIST.txt, 48): 259003000 -71347000 258945000 -71335000
15:39:11 1 (DIST.txt, 49): goto start
15:39:11 1 (DIST.txt, 4): set linedelay 5
15:39:11 1 (DIST.txt, 6): readmem $x1(259003) 0x06888178 F
15:39:11 1 (DIST.txt, 7): readmem $y1(-71347) 0x06888174 F
15:39:11 1 (DIST.txt, 8): readmem $x2(258945) 0x16A2ABF8 F
15:39:11 1 (DIST.txt, 9): readmem $y2(-71335) 0x16A2ABF4 F
15:39:11 1 (DIST.txt, 11): set $zero(0) 0
15:39:11 1 (DIST.txt, 11):  = 0
15:39:11 1 (DIST.txt, 12): set $x1(259003) $x1(259003)
15:39:11 1 (DIST.txt, 12):  = 259003
15:39:11 1 (DIST.txt, 13): set $y1(-71347) $y1(-71347)
15:39:12 1 (DIST.txt, 13):  = -71347
15:39:12 1 (DIST.txt, 14): set $x2(258945) $x2(258945)
15:39:12 1 (DIST.txt, 14):  = 258945